Posey Wireless Infrared Monitor Manuel d'utilisateur télécharger pdf

FCC ID GEKWPP-I

GEKWPPR

Distributed By Posey

Instructions

Both the transmitter/sensor and pager/receiver are powered by one 9-Volt

alkaline battery each (not included).

Battery Replacement

1. Turn the unit OFF. Press down on arrow and slide

battery door open.

2. Remove battery from compartment and hold in

one hand with thumb on terminal cap. Battery

connection wires should be away from thumb.

DO NOT pull terminal cap wires.

3. Use thumb to push terminal cap up, off the battery.

4. Connect terminal cap to new battery. Make sure

battery is securely connected to terminal cap and

insert into monitor unit.

5. Slide battery door closed.

Battery Installation:

M6153 REV D 062812

5635 Peck Road • Arcadia, CA 91006-0020 USA • Phone: 1.800.447.6739 or 1.626.443.3143

Fax: 1.800.767.3933 or 1.626.443.5014 • www.posey.com

To Activate the Unit

1. Be sure there are fresh batteries in both the transmitter and receiver.

2. Turn the pager/receiver on by sliding the toggle switch to either Low or High.

3. Turn the transmitter/sensor on by sliding the switch to chime or remote. When

set to chime, the alert will sound at the sensor. When set to remote, a signal will

be sent to the pager/receiver up to 100 feet (30 m) away.

NOTE: Once the transmitter/motion sensor has been turned on, there is a 35

second delay before the Sensor begins monitoring.

4. Verify that either the local alert sounds or the receiver sounds when you move

into the “operating range.”

Maintenance

• If the transmitter/sensor low battery light is illuminated, change the battery.

• If the pager/receiver low battery light is illuminated, change the battery.

Warranty

This product is warrantied for a period of 30-days.

Storage Instructions

This product is designed for use in normal indoor environments. This product may

be stored in ambient warehouse temperatures at normal humidity levels.

Avoid excess moisture or high humidity that may damage product materials.

Infrared

Sensor

Speaker

Low Battery

Indicator

Hanging

Socket

Holder

Low Battery

Indicator

Power Switch

[Motion Sensor]

[Receiver]

AC Adapter

Socket

Speaker

Power

Switch

Battery Cover

Standing Buckle

Clamp

Hanging

Socket

Code Switch

(Inside behind battery)

(Front)

(Back)

* See the following picture, the sensor will alert when motion is detected

Operating range about 5 m

16 feet

[SENSOR]

[RECEIVER]

Code Switch

Battery

Cover

Battery

Cover

Code

Switch

9-Volt Battery

NEDA/ANSI: 1604A

IEC: 6LR61

9-Volt Battery

NEDA/ANSI: 1604A

IEC: 6LR61

OPERATING RANGE

60˚

(Level View)

6˚

(Survey View)

8376

Posey

Wireless Infrared Monitor

8376

Wireless Infrared Monitor 1

Résumé du contenu

Page 1 - Wireless Infrared Monitor

FCC ID GEKWPP-IGEKWPPRDistributed By PoseyInstructionsBoth the transmitter/sensor and pager/receiver are powered by one 9-Volt alkaline battery each

Commentaires sur ces manuels

Pas de commentaire

Posey Wireless Infrared Monitor Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Santé et hygiène Posey Wireless Infrared Monitor. Posey Wireless Infrared Monitor User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Santé et hygiène Posey Wireless Infrared Monitor